Nickel Alloy

• Alloy
• Nickel-Alloy

• Application
• Other, Industrial and engineering applications

• Chemical Composition
• Primarily Nickel with additions of elements like Chromium, Iron, Molybdenum, Copper, depending on the grade

• Color
• Silver grey metallic

• Dimension (L*W*H)
• Length typically 1m-6m or as required; diameter as per specification

• Grade
• Nickel Alloy (Exact grade may vary: e.g., 200, 201, 400, 600, 625, 718, etc.)

• Hardness
• Depends on grade; generally 60-220 HB (Brinell Hardness)

• Material
• Nickel Alloy

• Moisture
• Negligible, non-porous solid metal

• Product Type
• Other, Bar

• Purity
• Typically 99% or higher, depending on the alloy

• Shape
• Other, Round

• Standard
• ASTM B160 / B164 / B574 or as specified

• Strength
• High tensile strength; varies by composition (typically 400-1300 MPa)

• Surface
• Polished/bright/black finish

• Temper
• Cold worked/Hot rolled/Annealed (as specified)

• Thickness
• Custom; usually 8 mm to 100 mm or more

• Width
• Not applicable for round bars, defined by diameter

• Alloy
• Nickel Alloy

• Application
• Other, High-corrosion and high-temperature environments

• Chemical Composition
• High Nickel with alloying elements (Cr, Fe, Mo, Cu, etc.)-exact as per grade

• Color
• Metallic Silver/Grey

• Dimension (L*W*H)
• Custom lengths up to 6 meters

• Grade
• Nickel Alloy 200/201, Monel 400, Inconel 600/625/718, Hastelloy C276/X, or as per specification

• Hardness
• 80-160 HB (Brinell)

• Material
• Nickel-based alloy

• Moisture
• Dry, rust-protected

• Product Type
• Other, Bar/Rod

• Purity
• Typically 99.5% minimum for Nickel 200/201

• Shape
• Other, Round Bar

• Standard
• ASTM B160, ASTM B164, ASTM B637, ASTM B166, ASTM B564, or as specified

• Strength
• Tensile strength 450 - 1100 MPa (varies with grade)

• Surface
• Bright, Black, Peeled, Polished, or as required

• Temper
• Annealed or as specified

• Thickness
• Available in diameters typically ranging from 6 mm to 300 mm

• Width
• Not applicable (round bars are measured by diameter)

• Alloy
• Nickel Alloy (W.Nr. 2.4066)

• Application
• Other, Corrosion Resistant Applications, Electrical Components, Laboratory Equipment

• Chemical Composition
• Ni: 99.6% min, C: 0.15% max, Fe: 0.40% max, Mn: 0.35% max, Si: 0.35% max, Cu: 0.25% max, S: 0.01% max

• Color
• Silver / Metallic Grey

• Dimension (L*W*H)
• Customization as per requirement (Standard: 1m - 6m Length)

• Grade
• Nickel 200

• Hardness
• Soft, Annealed (Typical 40-65 HRB)

• Material
• Nickel

• Moisture
• Dry / Moisture-Free Condition

• Product Type
• Other, Rod

• Purity
• 99.6% Min

• Shape
• Other, Rod / Bar

• Standard
• ASTM B160 / ASME SB160

• Strength
• Tensile Strength: 380 MPa (Typical)

• Surface
• Bright / Polished / Smooth

• Temper
• Annealed / Soft

• Thickness
• Customizable (Typically 3mm - 300mm diameter)

• Width
• Not applicable for rod; refer to diameter

• Alloy
• Nickel

• Application
• Other, Corrosion resistance, Heat exchangers, Food processing

• Chemical Composition
• Nickel (Ni) 99.6%, C 0.02%, Mn 0.35%, Si 0.35%, Cu 0.25%, Fe 0.40%, S 0.01%

• Color
• Silver / Metallic Grey

• Dimension (L*W*H)
• As required / Custom sizes

• Grade
• Nickel 201

• Hardness
• 60-90 HRB

• Material
• Nickel 201

• Moisture
• Nil / Not Applicable

• Product Type
• Other, Rod

• Purity
• 99.6% Min

• Shape
• Rod

• Standard
• ASTM B160 / ASME SB160

• Strength
• Tensile Strength: 380 MPa

• Surface
• Bright / Polished Finish

• Temper
• Annealed / Hard

• Thickness
• Customizable (Generally 3 mm and above)

• Width
• Not applicable (round rods)

• Alloy
• Commercially Pure Nickel

• Application
• Other, Used in electrical components, synthetic fiber production, caustic soda production, and aerospace

• Chemical Composition
• Nickel: 99.6% min, Carbon: 0.02% max, Manganese: 0.35% max, Silicon: 0.35% max, Iron: 0.40% max, Sulphur: 0.01% max, Copper: 0.25% max

• Color
• Silver

• Dimension (L*W*H)
• Custom Lengths (commonly 1000mm, 2000mm, 3000mm, or as required)

• Grade
• Nickel 201

• Hardness
• 60-85 HRB

• Material
• Nickel

• Moisture
• Nil

• Product Type
• Other, Bar

• Purity
• 99.6% Minimum

• Shape
• Other, Round Bar

• Standard
• ASTM B160, ASME SB160

• Strength
• Tensile Strength: Approx. 380 MPa

• Surface
• Bright, Polished

• Temper
• Annealed

• Thickness
• 6mm to 300mm (Diameter)

• Width
• N/A (round bar)

• Alloy
• Nickel 200 (Commercially Pure Nickel)

• Application
• Other, Corrosive Environments, Alkali Handling, Heat Exchangers, Piping Applications

• Chemical Composition
• Ni 99.6%, Fe 0.4%, Mn 0.35%, C 0.15%, S 0.01%, Si 0.35%, Cu 0.25%

• Color
• Silver/Grey metallic

• Dimension (L*W*H)
• Length up to 6 meters or custom; Outer Diameter: 6 mm to 600 mm

• Grade
• Nickel 200

• Hardness
• 60 HRB max (annealed)

• Material
• Nickel

• Moisture
• 0% (moisture-free solid pipe)

• Product Type
• Other, Pipe

• Purity
• 99.6% Ni (minimum)

• Shape
• Other, Round Pipe, Seamless / Welded

• Standard
• ASTM B161, ASTM B725, ASTM B775

• Strength
• Yield strength: 148 MPa (min)

• Surface
• Polished / Bright / Annealed

• Temper
• Annealed/Soft

• Thickness
• 0.5 mm to 20 mm (customizable)

• Width
• N/A (for pipe, use Outer Diameter)

• Alloy
• Nickel or nickel alloy

• Application
• Other, Used in corrosive environments, medical devices, aerospace, and oil & gas industry

• Chemical Composition
• Nickel (Ni) >99%, with minor elements like Fe, C, Si, Mn, S

• Color
• Silvery metallic

• Dimension (L*W*H)
• Customizable / as per requirement

• Grade
• Nickel 200/201 or as specified

• Hardness
• Annealed or as required

• Material
• Pure Nickel or Ni alloy

• Moisture
• Dry

• Product Type
• Other, Seamless/ Welded Tube

• Purity
• 99.6% minimum

• Shape
• Other, Round tube

• Standard
• ASTM B161, ASTM B163

• Strength
• High tensile strength

• Surface
• Bright/Polished

• Temper
• Soft or hard

• Thickness
• As required (commonly 0.5 mm to 5 mm)

• Width
• Not applicable (tube, circular cross-section)

• Alloy
• Nickel-Based Alloy

• Application
• Other, Shipbuilding, Power Generation, Petrochemical, Desalination Plants

• Chemical Composition
• Ni: 60-70%, Fe: 15-25%, Cr: 15-22%, Mo: 2-10%, others as per grade

• Color
• Metallic Gray/Silver

• Dimension (L*W*H)
• As per requirement / Cut to size

• Grade
• Nickel Alloys

• Hardness
• Up to 220 HB (varies per grade and temper)

• Material
• Nickel Alloy Steel

• Moisture
• Nil

• Product Type
• Other, Steel Plate

• Purity
• 99% minimum (varies per alloy type)

• Shape
• Other, Plate / Sheet

• Standard
• ASTM B162, ASTM B168, ASTM B463, ASTM B409, ASME SB162, JIS, DIN

• Strength
• High tensile strength, typically 400-900 MPa depending on alloy

• Surface
• Bright, Polished, Mill finish, 2B, No.1, Pickled

• Temper
• Annealed, Hard, Quarter Hard, Half Hard, Full Hard

• Thickness
• 0.5 mm to 100 mm

• Width
• 500 mm to 2500 mm (custom sizes available)

• Alloy
• Nickel alloyed (Nickel 200/201 or as specified)

• Application
• Other, Pipe connection, pressure vessel, heat exchangers

• Chemical Composition
• Nickel (min) 99%, Fe <0.40%, C <0.15%, Cu <0.25%

• Color
• Silver, Metallic gray

• Dimension (L*W*H)
• Custom/Standard size per requirement (e.g., OD 150mm x ID 75mm x Thickness 15mm)

• Grade
• Nickel 200/201, Nickel Alloy UNS N02200/N02201

• Hardness
• Rockwell B75 - B90 (approx, varies by alloy and temper)

• Material
• Pure Nickel or Nickel Alloy

• Moisture
• Moisture Free

• Product Type
• Other, Flange

• Purity
• Typically 99.0% to 99.5% Nickel

• Shape
• Other, Round flange with holes

• Standard
• ASTM B564, ASME SB564

• Strength
• Tensile Strength: 390 MPa (min), Yield Strength: 100 MPa (min)

• Surface
• Bright, Smooth, Polished

• Temper
• Annealed/Soft

• Thickness
• 3 mm to 50 mm

• Width
• As per flange dimensions (outer diameter)

• Alloy
• Nickel Alloy

• Application
• Other, Fluid and Gas Routing

• Chemical Composition
• Nickel >99% with minor iron, copper, manganese

• Color
• Silver

• Dimension (L*W*H)
• Custom/Standard (e.g., 1/2 x 1/2 x 1/2)

• Grade
• Industrial

• Hardness
• High

• Material
• Nickel

• Moisture
• Nil

• Product Type
• Other, Fitting

• Purity
• 99.9%

• Shape
• Other, Tee

• Standard
• ASTM B366

• Strength
• Robust

• Surface
• Nickel Plated

• Temper
• Annealed

• Thickness
• 3 mm (approx.)

• Width
• Standard Sizes Available

• Alloy
• Pure Nickel or Nickel Alloy

• Application
• Other, Suitable for electrical and thermal conductivity applications, corrosion resistance, fabrication

• Chemical Composition
• Ni 99.6%, C 0.15%, Fe 0.4%, S 0.01%, Si 0.35%, Cu 0.25%

• Color
• Metallic Silver/Grey

• Dimension (L*W*H)
• Custom lengths, typically 1-6 meters

• Grade
• Nickel 200/201 or as specified

• Hardness
• 70-120 HB depending on temper

• Material
• Nickel

• Moisture
• Dry

• Product Type
• Other, Metal Rod/Bar

• Purity
• 99.6% minimum

• Shape
• Other, Round

• Standard
• ASTM B160/B161, DIN 17751, JIS H4551

• Strength
• Tensile Strength: 380-550 MPa

• Surface
• Bright/Polished

• Temper
• Soft, Half-Hard, Hard

• Thickness
• Custom, typically 2 mm to 100 mm diameter

• Width
• N/A (round rods)

• Alloy
• Nickel-based Alloy

• Application
• Other, Engineering, construction, marine, and industrial assemblies

• Chemical Composition
• Ni: 99% min, Fe: 0.40% max, C: 0.15% max, Mn: 0.35% max, Si: 0.35% max (varies by alloy)

• Color
• Silver/Grey metallic

• Dimension (L*W*H)
• Various (M3-M56 diameter, length 10mm-500mm range or customized)

• Grade
• Nickel Alloy 200/201, Inconel 600/625, Monel 400/K500 (as per requirement)

• Hardness
• Rockwell B70-B95 (varies by alloy type)

• Material
• Nickel Alloy

• Moisture
• No moisture, solid metal product

• Product Type
• Other, Bolts/Fasteners

• Purity
• Typically 99% Nickel minimum

• Shape
• Other, Hex Bolt, Threaded Rod, Socket Cap, Custom

• Standard
• ASTM B160, ASTM B164, ASTM B574 (others on request)

• Strength
• High tensile and yield strength (ultimate tensile strength: 550-830 MPa)

• Surface
• Smooth, Passivated or as per customer requirement

• Temper
• Annealed, Solution treated (as required)

• Thickness
• As per standard bolt dimensions (M3-M56 or custom)

• Width
• Across flats as per DIN/ASTM standard

• Alloy
• Nickel Alloy 200, 201

• Application
• Other, Industrial usage: Heat Exchangers, Condensers, Valves

• Chemical Composition
• Ni: >99.6%, Fe: <0.40%, C: <0.15%, Mn: <0.35%, Si: <0.35%

• Color
• Silver

• Dimension (L*W*H)
• Custom as per order/specification

• Grade
• Nickel 200 / 201, Nickel Alloy UNS N02200/N02201

• Hardness
• 60-80 HRB (varies by temper)

• Material
• Pure Nickel / Nickel Alloy

• Moisture
• Nil

• Product Type
• Other, Fittings (Flanges, Butt Weld, Socket Weld, Threaded)

• Purity
• 99.6% minimum

• Shape
• Other, Round, Flange

• Standard
• ASTM B366, ASME SB366, DIN, EN, JIS

• Strength
• Yield Strength: 148 MPa min, Tensile Strength: 380 MPa min

• Surface
• Polished, Shot blasted, Pickled

• Temper
• Annealed / Hard

• Thickness
• 3 mm to 25 mm (custom as required)

• Width
• 10 mm to 1000 mm (based on fitting)

• Alloy
• Nickel 200 / 201

• Application
• Other, Used for battery tabs, chemical industry, high-temperature equipment

• Chemical Composition
• Ni 99.9%

• Color
• Silvery Gray

• Dimension (L*W*H)
• Customizable, example: 1000mm x 1000mm x 5mm

• Grade
• Pure Nickel

• Hardness
• 110 HB

• Material
• Nickel

• Moisture
• 0.02%

• Product Type
• Other, Sheet/Plate

• Purity
• 99.9%

• Shape
• Other, Plate / Sheet

• Standard
• ASTM B162 / B160 / B161 / B163

• Strength
• Tensile Strength: 380 MPa

• Surface
• Bright / Smooth

• Temper
• Soft/Annealed

• Thickness
• 0.1 mm - 50 mm

• Width
• 10 mm - 1000 mm